Focus bonnet lock replacement

Broken ford focus (06) bonnet lock replacement mechanism version 2. See my previous vid for lock removal procedure This design utilising a ground down long screwdriver fitting thru a 15mm copper. I have a replacement kit and and need some advice on on how to open the bonnet with the least damage. A bonnet lock ensures it is impossible to open your bonnet unless you unlock it.

These parts work together to protect your engine from the elements and to prevent theft or vandalism. Many modern cars include combined locks and catches.

Faulty or poor quality catches and locks can fail to keep your bonnet in place. This can be hazardous when driving, especially if the bonnet flies up and. These ford key bonnet locks are notorious for failure, sometimes the spare key opens it, most time they are goose a lot cut a hole under the badge, drill the bolts out, remove the lock and use a long cross head screwdriver to open the bonnet. Ford Focus - bonnet lock not working.

The key turns, but the bonnet does not pop open. On researching the problem, I have read that the Focus is prone to this. I had the air conditioner compressor changed a week ago and this is the first time that I am opening the bonnet after that. It is possible that the bonnet.

Any way to fix this or the best solution without paying the.

This is the bonnet lock with bowden cable rebuild kit, for right hand models only. My brother lost the key to hos reg Focus when he visited recently. After hitting the bonnet a few times and after about mins the lock suddenly turned enough to open the bonnet.

Pushing the bonnet down to lock it is more likely to bend the bonnet due to how thin the damn sheet metal is! Bonnet Release Lock Latch Repair Kit Key. The ford focus can suffer from the bonnet lock not opening. The bonnet is opened from the out side of the car behind the grill with a key.

Theres a plastic star shape shaft that breaks when this happens the lock can not turn to open the bonnet ,Also the long barrel tube breaks up on the inside over time again same symptoms,can not open the bonnet. The only way to open the bonnet then is to. The lock mechanism seems to have an initial latch which loosely holds the bonnet and one lower down which I guess holds it a bit more firmly.

Remove the screw and disconnect the bonnet earth cable Mark the location of the hinges on the sides of the bonnet with a soft pencil or masking tape, then loosen the four hinge bolts. With the help of an assistant, remove the bolts and lift the bonnet from the vehicle (see illustration). This kit contains the bowden cable, the lock barrel core and a kit of tumbler slides. Once bonnet open remove the bonnet lock mechanism, then with draw the lock barrel, shaft, coupling, By looking in side you will understand regarding the cross key Anyway you need to remove one of the catches from the side of the plastic key This way it will fit back in to coupling.

Just Tried to open my Ford focus bonnet but it wont open! Key goes in and moves freely but i cant hear it catching on the Lock at all. Thinking the lock was the same as the one in this topic, I drilled several holes as described in the text above with no sign of any bolts and got fed up and took a jigsaw to the grill and the lock barrel is entirely different on the CMax it clips onto the grill and taking out the lock barrel just ruins it and you still have a locked bonnet , I had to put my hand over the slam panel when I could. The latch is part of the complete lock assembly, which you must remove.

Ti HP Body automotive parts and others.

TOP auto parts brands from a single source for your FORD FOCUS III 1. I need to open the bonnet to fill up water and cannot find any way to open the bonnet ! No bonnet release catch in the cabin at all. My friends focus bonnet wouldnt open. He was able to remove the lock assy and open it with a long screwdriver as its just a cross slot when its removed tho you will more than likely need a new part which is only £IIRC. Best Answer: remove the stone guard from under the rad.

Today I opened my bonnet but could not get it to close. Do you really have to remove the passenger-side front lamp, the battery (and airbox?) to replace the release cable that is used to open the bonnet ? The bonnet can be opened from the exterior, by releasing the latch, hidden just under the bonnet lip, or by pulling a small lever inside the car, usually located beneath the steering wheel, which is attached to the bonnet pull cable, which causes the bonnet to pop open. Payment required within days. No pending payments or e-cheques.

Components you will need to remove to open bonnet (and how) without breaking your grill. We are passionate about quality and will not let a part go out if we. Popping the hood on your Focus is a two step process, you need to release the hood latch inside your Focus and then you need to release the safety latch under your hood in the front of your Focus.

The video above shows you the location of both hood latches. If this occurs on your Focus , simply pull. As isitme says the Focus uses the badge for a cover to the bonnet lock so should be just a matter of a clip on the rear of the assembly. Replace front grille badge ford focus ?